説明
Here is a fun little project if you want to take MSFS to the next level of realism, I made this contol unit to add realism and have more physical switches, so you dont need to take your focus of the take off or landing because the controlls is right in front off you, you can use it for GA Aircraft or Airliners. It is a very easy and straight foward to build. Needs. 3x Green 5mm led 1x Red 5mm led 1x on/on or on/off toggle switch for the gear. 1x self reset toggle switch ( The one that return to center if you let it go for the flaps toggle) 4x 5x8mm screws for the levers 4x 5x23mm screw for the stand 8x 3mm screws for the faces Super Glue for the switch holders. Then a bit of wire to make connections, But you can also use anything you want that will work. You will also need 220ohm resistors for the leds, i used a leonardo pro micro with mobi flight as the brains but you can use anything you can get a hold off.
About this model
Gear And Flap Control is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
