Headlight_assembly_motorcycle

説明

Complete headlight unit and dash for motorcycle. I made this headlight for my naked Yamaha FZR1000 EXUP, but im sure it will fit on other bikes to with or without some mods. But if your creative you can make this work and you will have a base to go from :) The dash will fit Koso temp/voltage gauges, and the Koso DB-01RN speedo. The dash will fit any type of "superbike handlebar" and will be mounted by 2 zipties that will hold dash firmly against handlebar. If take the bike up to highspeed and the dash will stay stable. Some slight modification on inside of dash may be needed to fit to your setup The spoiler can be mounted with 2 screws to the dash, or glued with expoxy whatever you prefer. The headlight unit itself is mounted with the 2 vork clamps that will slide over your fork legs inside diameter is 55mm lenght can be shortend if that is required for your setup. the clamps will be seated inbetween bottom and top crownplate Inside the headlight you can fit 2.5 Inch Projector Lenzen, the housing of the lenzen will need some small modifications to make them fit as close as possible for the angel eyes rings that go arround the projector lenz. ( if you want this ofcourse) Inside the headlight there is room for 2 pieces of balast if you would go with Xenon lights. 2.5 inch lenzen https://nl.aliexpress.com/item/4001103782661.html?spm=a2g0o.orderlist.orderlist_main.51.166579d2hhOTxr&gatewayAdapt=glo2nld Angel eyes 76mm…