Fujimi 1/12 R32 GTR Firewall Replacement

説明

This is a replacement for the flat firewall in Fujimi's 1/12 R32 GTR model kit, this requires extensive modification and removal of the existing firewall following the mold lines. Its not perfect, its not 100% accurate either but certainly looks a million times better than the flat plastic piece. UPDATED 24 November Brake booster, Clutch Master Cylinder & Wiper Motor have been added along with an updated firewall with location plugs for these pieces. A few things to note: I'm still learning, so its not perfect. I've designed it to follow the mold lines to make installing this easier, its not 100% accurate and does require blending in to the rest of the chassis, thankfully this is quite low down and not overly visible. Your cuts will need to be at 90degrees with the mold line. You also need to modify the body, trimming the leading edge of the engine bay in front of the windscreen to approx 1mm thick, this can be at an angle so as to keep the structural integrity of the body. Be aware that the plastic is quite thick and its not a cheap kit, so take your time. This piece makes installing the working steering very difficult, you may need to remove additional material from the back of the piece. Tag me in your builds (Instagram @nineteencreativenz_models), I'd love to see others takes on this! I'll be adding more 1/12 parts as i go with building my own GTRs