HydroTowerPlanter

説明

Hydroponics Tower Planter, Make as many teirs as you need! Including is the top cap and bottom flange. There are five different options for teirs. A straight pipe with no pod holders. A 3 pod holder A 4 pod holder A 5 pod holder a 6 pod holder I assymbled mine on a 2 gal bucket, I place a bilge pump in the bottom with a hose that went to the top inside the tower. I used a 12v power supply and a outlet timer to time when the water would flow. I also use a rubber grommet for the cable coming out the top of the bucket. You could use any sturdy container. The inner diameter of the pipe is 4", So you need to cut a 4" hole in the top. I used a sharpie and exacto knife to trace the bottom flange and cut out the hole.