説明
I didn't like how the PSU looked in the stock configuration. I designed this using AutoCAD. The bottom of the PSU is approx 1/4" off the surface when the stock rubber feet are used. I recommend using a different type of feet to raise the whole printer off the surface. You will need extra bolts and nuts to mount. Simply remove PSU from structure. Remove plastic housing from PSU. Remove 3 wires from switch and run thru small square hole in back of switch box. Reconnect wires and mount switch box. Mount left and right supports to PSU, using stock holes. Then mount to structure. Enjoy!!
About this model
Ender 3 Pro PSU relocation is a 無料 3D model in the 動物・クリーチャー category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
