Extended ball chute for Lego Mindstorms
- 25 閲覧
このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Cults3D で見る ↗説明
This is an extended ball chute for Lego Mindstorms ball-shooting robots. It has a female cross attachment at the bottom for attaching to the launcher or a stock chute. The lower 8mm of it are just for support, and you should be able to snap it off with pliers--or just cut. I recommend you first print the attachmenttest.stl file not to waste filament to make sure the tolerances on the female cross attachment match your printer. If they don't, then use the Customizer to adjust the tolerances. You can also customize the height by changing the number of sections. If balls get stuck inside, run some rolled up sandpaper through the tube. You can print extra balls with this: http://www.thingiverse.com/thing:2303422
About this model
Extended ball chute for Lego Mindstorms is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
