Simplest Dynamometer in the world
- 13 閲覧
このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Cults3D で見る ↗説明
Last time I have made a dynamometer using friction force with a metal plate. Today I will make a modification for more simple and easy use. It is the simplest dynamometer in the world using a 3D printer as I knew. The friction force can be adjusted easily with the double thread screw. Use the clockwise and counterclockwise thread, the adjusting process becomes very simple. You only need to rotate the screw the upper and bottom parts will move at the same speed but in different directions. They will keep the balance and make the friction force change smooth and homogeneous. The screw, upper, and bottom parts are printed using a small layer height value. I use 0.2 mm in the layer height. The speed can be measured using a tachometer. You will only use several M3 balls and 4 M2X8 screws and 2 M2 screws and nuts. One long M3 screw can be changed to another long stick. .
About this model
Simplest Dynamometer in the world is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
