説明
Simple fold-down doorstop. Designed to fit 1" round foam grippers I found at the hardware store. I didn't want to put screw holes in my door (this was designed for light interior doors) so it's mounted with an adhesive foam mounting strip. In addition to printing one of each part, you will need some simple hardware: 1x machine screw, 3.75mm (1/8in) diameter & at least 42mm (about 1 5/8in) length 1x nut that fits the screw 2x washers, 9mm (~3/8in) diameter You could probably make do without the washers, but I find that it's always a good idea to put washers under both the head and nut of any bolt being used for 3D printing.
About this model
Folding Doorstop is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
