Zenless Zone Zero - Dialyn Ring

説明

This model is designed for Dialyn cosplay from Zenless Zone Zero. It is separated into 3 components, the covers, ring and accessories. Each components are cut into parts to fit in a printer with a platform size of 200mm x 200mm x 200mm. The parts can be further split in half if you need a larger flat face that can easily lay on the printing bed. There are pictures with parts' name and installation guide labeled in the preview section which you can refer to. I include the combined version as well just in case you need it. The ring is quite complicated to install if you don't follow the picture. I suggest print parts by parts so you won't mess up with the parts sequence. You can install in whichever sequence you comfortable with there is no fix rotation as long as the parts install in the correct order so the pattern on top can be correct. There are no tunnel for bone or alignment. Instead, built-in peg is made on each section as a guide to align to the corresponding parts. If support are applied to the cavities or peg, remove thoroughly so they can insert smoothly. Although there are 0.2mm clearance made on the cavities, some sanding and putty application are expected depending on the printing quality and accuracy. Once the ring is done, you can make the black and white cover on top. You can install onto the ring parts by parts or as a whole piece once they are combined. There are cavities made on the covers for the screen and buttons. The detail on top is quite shallow tho…