550 Rc Motor mounts Various Angles

550 Rc Motor mounts Various Angles

無料 STL ガジェット
  • 15 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Cults3D で見る ↗

説明

these mounts are for standard sized 550 (can size) RC motors and have an angled base so they can be mounted in RC boats or anything that requires the motor to be at a specific angle. The mounting slots are 4mm with an 8mm indent to allow for washers. Slots and indent are designed to be perpendicular to the base of your model when installed so the motors will not slide forward and move position after mounting. approx size is 80x40x50mm base mount spacing 67mm Angle Range is 0.0, 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5 degrees

About this model

550 Rc Motor mounts Various Angles is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

類似モデル