MiG-15 Jet Fighter – 3D Printable Scale Model

説明

▶ Model Details Format: STL Parts: Single-piece fuselage with integrated wings, stabilizers and pylons ▶ Ideal Print Size Overall dimensions: Length (nose → tail): 166 mm Wingspan: 167 mm Height (bottom landing gear → top of fin): 61 mm (These dimensions fit comfortably on most desktop printers without scaling.) ▶ Recommended Print Settings Layer height: 0.10 mm maximum You may experiment up to 0.20 mm, but the wing tips and thin fairings will lose crispness if layers get too thick or won't print at all. Nozzle diameter: 0.4 mm (standard) Infill: 15-100% (grid or gyroid) Walls/Perimeters: 2–3 Supports: Under-wing pylons, nose intake and any overhangs > 60° must be supported. Use light, easy-to-remove tree or custom supports to preserve the thin wing edges. Print speed: 40–60 mm/s Material: PLA, PETG or ABS Bed adhesion: Brim or skirt recommended ▶ Post-Processing Tips Sanding & priming: Lightly sand the wings and stabilizers to remove any layer lines, then prime before painting for a perfectly smooth finish. Assembly: Model is one piece, but you can optionally glue on tiny pylons or under-wing stores after painting for extra realism.