説明
After searching for this design for a while, I found nothing detailed or functional, so I decided to design it myself. With time and patience, and for all of you, this was the result. SIG-SAUER P220 in semi-functional 3MF format. Ready to print primarily in PLA, except for parts prone to wear, recommend petg in pins and links. Printed in variable layer heights, depending on the piece. Requires a 6cm long, 1cm diameter spring, maximum 1.4cm for Slide, another one 0.8mm long, 0,5 mm diameter for magazine catch button; rubber bands for the trigger and hammer. Disclaimer The SIG Sauer P220 3D model provided on this platform is a non-functional replica, designed solely for display, cosplay, or collectible purposes. It is not designed or intended to be modified for the purpose of firing projectiles or any other use that may violate local, state, or national laws. The creator of this model assumes no liability for the misuse of this design, including but not limited to modifications that may convert it into a functional weapon, property damage, personal injury, or any other consequences arising from its use. It is the user's responsibility to ensure compliance with all local rules and regulations before downloading, printing, or assembling this model. By accessing this design, the user agrees to these terms and conditions and releases the creator from any legal claims arising from its use.
About this model
SIG-SAUER P220 is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
