Interlocking Desk Drawer

説明

Design ConceptThis interlocking desk drawer system features a modern, geometric design. It's designed to be stacked efficiently while maintaining a sleek look that complements contemporary office spaces. They can even be mounted under a desk with the included connectors that have screw holes.Uses Ideal for organizing office supplies, stationery, and personal items on your desktop or workspace. This modular system allows users to customize storage according to their needs by stacking or un-stacking units as necessary. Users can print multiple drawer units and keep adding them on.Printing SuggestionsRecommend using 0.2mm layer height to balance print speed and detail. It was designed with 0.2mm but it should still print ok if you want to use a thicker layer heightNO SUPPORTS ARE NEEDEDPrint the drawer housing on its backAssembly InstructionsThe little drawer locks do not need to be used. They can be installed if you do not want the drawers to pull out of the housings when you are pulling them open. I have found that you may have to trim them a little bit to get them to fit because of printer tolerances and differences in filaments.There are 4 different connectors. Two of them have "TIGHTER" on them; you may find that you need to use the "TIGHTER" ones depending on your printer and the type of filament that you use. There are two that have screw holes in them so that they can be mounted under a desk. #6 wood screws should work fine; #8 might work as well.The drawer inserts…