Wolf hueforge
- 20 閲覧
このモデルは Creality Cloud で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Creality Cloud で見る ↗説明
Project: Wolf.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Green Transmission Distance: 2 PLA BambuLab Basic Blue Transmission Distance: 4 PLA PolyLite Grey Transmission Distance: 1 PLA Default White Transmission Distance: 5 This print uses 6 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #15 (1.28mm) swap to Black At layer #17 (1.44mm) swap to Green At layer #19 (1.6mm) swap to Blue At layer #21 (1.76mm) swap to Grey At layer #22 (1.84mm) swap to White for the rest.
About this model
Wolf hueforge is a 無料 3D model in the その他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
