AR cleaning tool

AR cleaning tool

無料 STL ツール
  • 30 閲覧

このモデルは Creality Cloud で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Creality Cloud で見る ↗

説明

AR15 cleaning tool for holding upper and lower receiver open during maintenance.Print the tool at 50% infill using cubic pattern placed flat on largest side (holes horizontal) with supports.Print the pin at 100% infill (again on the flat side), no supports required for the pin.Printed using generic PETG+. Nozzle temp 235°C. Bed temp 75°C. 0.16mm layer height using 0.4mm nozzle at 120mm/s with 60mm/s first layer and wall speed. Retraction enabled - set to 0.8mm at 40mm/s.

About this model

AR cleaning tool is a 無料 3D model in the ツール category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

類似モデル