8 mm Urethral Dilator Wave Design

説明

8 mm Wave Urethral Dilator with Large Flow ChannelThis model features an 8 mm diameter urethral dilator with a smooth wave-shaped profile and a large central through-hole designed to maximize fluid flow while maintaining structural strength.The streamlined geometry and rounded tip are optimized for high-quality resin printing, while the wave profile provides a distinctive appearance and improved handling.Features8 mm outer diameterLarge central through-hole for improved flowWave-shaped ergonomic designSmooth rounded tipOne-piece constructionOptimized for high-resolution resin printingRecommended Print SettingsPrinter: SLA / MSLA Resin PrinterMaterial: Tough Resin (recommended)Print Orientation: Vertical (90°)Layer Height: 0.05 mmSupports: Medium supports at the base only. Add light supports if recommended by your slicer.Post-Processing: Thoroughly wash, fully UV cure, remove all support marks, and carefully inspect the finished print for any defects.Printing the model in a vertical (90°) orientation provides excellent dimensional accuracy, a smooth surface finish, and a clean internal channel while minimizing visible support marks. Tough Resin is strongly recommended due to its superior durability and resistance to cracking compared to standard resins.Printing TipsEnsure your build plate is properly leveled before printing.Use adequate bottom exposure settings for reliable adhesion.Allow the print to drain completely before washing.Inspect the entire model carefully…