説明
Project: Tiger.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 108.5x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 1.68mm#000000 PLA+ Sunlu Black Transmission Distance: 0.6#565d65 PLA+ Sunlu Grey Transmission Distance: 2#ffffff PLA+ Sunlu White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to GreyAt layer #14 (1.2mm) swap to WhiteThis slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.At layer #24 (2mm) swap to Black for the rest.
About this model
Tiger is a 無料 3D model in the その他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
