説明
To assemble, you'll need: 1 M3 nut 1 M3x35mm screw (cone head) 1 M4x16mm screw (hexagon socket head) T8x4 trapezoidal screw, approximately 17 cm Glue After printing, remove the supports. Glue the elements from file A together with the element from file B. Glue the flat part of element B to element A in the recess after clearing the supports. After heating, glue the nut into element C. Glue the elements from file D onto one end of the T8x8 trapezoidal screw. Element E is intended for the locking screw; press it in place using a hot melt. The monopad is universal, right and left-handed
About this model
AEA Sonic Monopad is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
