Seat components for Fiat Panda (141A) and Autobianchi/Lancia Y10

説明

I recreated these seat components from scratch for the first generation Fiat Panda and Autobianchi/Lancia Y10.The kit includes:The seat release/tilt lever with its matching trim frame;The side plastic covers for the seats;An aesthetic trim cover to overlay the backrest adjustment lever.I've created these parts because I wanted to install Y10 seats in my Panda but the ones I rescued from the junkyard had badly damaged black plastics whereas my original interior was grey. So, I decided to scan the original parts, redesign them from scratch, and print them in grey ABS to match the factory look.Please ignore the seat covers in the pictures! I know they look terrible, but I haven't found an upholsterer yet to re-trim everything with the original fabric.Print Settings & Tips:Lever Orientation: The seat release lever must be printed flat on the bed (as shown in the photos). If printed vertically, layer adhesion will fail, and the lever will almost certainly snap during use;Infill / Perimeters: Increase the wall/perimeter count in your slicer to make the parts virtually solid and extra durable;Compatibility: These release levers are designed for the older models (snap-fit). They are not compatible with the newer versions, which have a slightly different shape and are held in place by a rivet. However, using my STL file as a base, it should be fairly easy to modify them to fit the newer variant.Enjoy and happy printing!