LX200-OnStep Conversion - Dec Block Bracket

LX200-OnStep Conversion - Dec Block Bracket

無料 STL 収納・整理
  • 22 閲覧

このモデルは Thingiverse で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Thingiverse で見る ↗

説明

Context:This is part of a project to convert a Meade LX200GPS to the OnStep system. The project is documented in "Conversion of LX200GPS to OnStepX", by Richard Francis, 30 April 2025, available in the Files section of LX200GPS@groups.io.Fabrication:3D printing is possible but the the result is rather flexible. What's more, if the OnStep drive parameters are mis-set the stepper motor can become hot and this jhas a tendency to permanently distort the plastic part. So 3D printing in plastic should be considered more of a test fit or proof-of-concept than as a permanent solution.CNC manufacturing in aluminium is preferable. Note that there are two small holes which needs to be tapped; one at M2x0.4, and the other M3x0.5, as found on the drawing. They take M2 and M3 screws respectively.I used the service at https://jlcpcb.com

About this model

LX200-OnStep Conversion - Dec Block Bracket is a 無料 3D model in the 収納・整理 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.

類似モデル