protractor with alignment arm
- 27 閲覧
このモデルは Thingiverse で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Thingiverse で見る ↗説明
fillament: petgprinter: prusa mk4sI used 0.10mm detail for the shaft and c-clips, but 0.20mm detail for the protractor and arm. It seemed to work fine.15% infillThe tolerences are a bit tight, so you may have to adjust.The part of the shaft for the c-clips is 4.5mm in diameter and 2mm tall.You just need one of everything exept for the c-clip. You need two c-clips.All you have to do is align the arm with one angle, and the protractor with another angle. the slots in the arm let you see the angle of the protractor.Feel free to comment any questions.
About this model
protractor with alignment arm is a 無料 3D model in the その他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
