説明
A simple and effective 3D-printed tick removal tool designed to remove ticks safely and cleanly — without squeezing the body or risking the head breaking off, which are the most common mistakes when using regular tweezers.Material: PLA or PETG (PETG recommended for outdoor kits — better UV, moisture, and heat resistance)Layer height: 0.12 or 0.16 mmInfill: 30%+Supports: none requiredPerimeters: 3+How to use:Slide the notch under the tick as close to the skin as possible.Apply gentle upward tension — do not pull sharply.Rotate 2–3 turns until the tick detaches cleanly.Tilt the tool so the tick drops into the recess, then transfer it to a container for lab testing.After removal: Disinfect the bite site. Do not discard the tick — take it to a laboratory for testing. Early testing allows treatment or prophylaxis to begin immediately without waiting for symptoms. Store the tick in the fridge until tested.Important: never squeeze the tick's body or use heat — this increases the risk of infection.
About this model
Tick Remover is a 無料 3D model in the その他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
