BD VFG-S1 M-lok Vertical Foregrip

説明

A Vertical Fore Grip That I designed with improved Grip Texture. sized small for excelent use with forward mounted devices on your handrail. Mounts to any M-lok interface. Mostly for Airsoft unless printed in a stronger filament. 2.25" overall height Use with M4x12mm long countersunk M-lok hardware.such as https://www.amazon.com/dp/B0DZ6L6JC5?ref=ppxyo2ovdtbfedasintitle&th=1 takes around 2 hours to print at 0.12mm layer height. There are 4 Model Files: BD VFG-S1.1 PETG:PLA.3mf = a .3MF file with all setting optimized to print in PETG or PLA. This file has the main rough texture pockets and a very minor pebbling for the rest of the body's texture so its not smooh. BD VFG-S1.1 PA12-CF OPTIMIZED.3mf = a .3MF file with settings specifically optimized and tested to print the VFG using PA12-CF filament. BD VFG-S1.1 no main boday texture.stl = A STL file that only has the texturing in the rough texture pockets. great for use with engineering fillaments that already com out somewhat textured when printed. BD VFG-S1.1 w-bodytexture = A STL file that has the main rough texture pockets and then a more sutle pebble texture on the rest of the main body. good for printing in PLA, PETG, or other filamnets that some out in a much smoother finish.