説明
I designed this basic Boeing 737 overhead panel to add more immersion to my setup. These are the main functions needed to perform a flight. The instrument panel is entirely laser-cut using 3mm transparent acrylic. For the letters, you only need to create a recess using the weakest laser to mark and recess the area, and you can paint over it in the color you want; the light will pass through normally. Includes DXF and STL files for the knobs. Size 325mm x 195mm The enclosure can also be cut from acrylic or 6mm MDF. For the lighting, I used a common B10k potentiometer with an IRFZ44N MOSFET (very easy to find) with approximately 1.5 meters of warm white LED strip. I used a 12V strip to also power the fighter button, and a common 12V 2A power supply is sufficient. To control everything, I used an STM32 Bluepill with FreeJoy, but you can choose either that or a ProMicro, using a matrix connection. Here are the parts that were used in this project. 5x selector switches, I used 12-position ones, but 6-position ones are also acceptable. https://pt.aliexpress.com/item/1005006423279677.html?spm=a2g0o.orderlist.orderlist_main.15.7fc3caa4OHluxH&gatewayAdapt=glo2bra 36 on/off switches https://pt.aliexpress.com/item/1005006423279677.html?spm=a2g0o.orderlist.orderlist_main.15.7fc3caa4OHluxH&gatewayAdapt=glo2bra 5x T80-T switches t8014a https://pt.aliexpress.com/item/1005001394593797.html?spm=a2g0o.orderlist.orderlist_main.25.7fc3caa4OHluxH&gatewayAdapt=glo2bra 2x 3-position on-off-on…
About this model
Overhead Boeing 737 is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
