ROUNDHOUSE BRIDGE 1:87 HO SCALE

説明

This ROUNDHOUSE BRIDGE can be lengthened or shortened to fit your layout. Within reason of course. It is an easy print producing very fine eye-catching detail for your layout. The circular pit will have to be scratch built for your desired diameter. Press in the handrails to the boardwalk notches with non-serrated needle nose pliers. For the main beams simply glue part A and part B together. All elements are printed separately for ease of painting and weathering. I exclusively print with PLA and have found that ordinary clear Klean-Strip lacquer thinner is a wonderful glue. Make a small test for yourself of two flat pieces of scrap PLA and give it a try. Let sit for 20 seconds and then try to break it apart. It leaves no residue and is applied with a small brush. I've been using lacquer thinner as a glue on styrene and PLA for years. No sloppy or messy glue to show when finished. For heavier construction use Testors "CEMENT FOR PLASTIC MODELS". I have always painted my models with artist oil paint, specifically Windsor and Newton Griffin Fast Drying Oils. They dry overnight. I never liked acrylics because they obliterate fine detail, and they always look chalky to me. Oil colors are made from the finest color pigments available; color saturation and permanence are proven throughout the history of art. Thinned with Mineral Spirits you will get the most remarkable weathering and aging finishes you have ever seen. I feel reasonably assured that once you try Griffin Oils you…