Pebble Stack Vase

説明

3D Printable Modern Decor Vessel A calming, organic vase inspired by smooth river stones stacked in a balanced tower. Its flowing curves and natural silhouette make it perfect for minimalist interiors, spa settings, or as a peaceful accent in any space. 📏 Measurements & Fitting Instructions How to Size and Scale: Height: Measure your shelf or table to ensure the vase fits proportionally—default size is ideal for small to medium arrangements. Opening Diameter: Check the opening suits the stems or dried flowers you plan to display. Wall Thickness: Maintain at least 2–3 mm for sturdiness when scaling. ✅ Tip: This vase is best for dried arrangements. If you want it to hold water, seal the interior with a food-safe epoxy. 🖨️ Printing Instructions Printer Settings: Layer Height: 0.16–0.2 mm for smooth curves and even surfaces Infill: 0–10% if using vase mode (spiral printing) or 15–20% for standard solid walls Supports: Typically not required unless your model has deep undercuts between pebbles Orientation: Print upright for best strength and clean stacking detail Material Recommendations: PLA: Easy to print and finish, perfect for decor PETG: Adds durability and some moisture resistance Silk PLA: Ideal for a polished, stone-like finish 🎨 Post-Processing & Finishing Sanding: Lightly smooth the outer surfaces if desired Painting Ideas: Base: Stone gray, off-white, or sand colors for a natural look Accents: Dry brushing in lighter tones to highlight the pebble edges Optional: Gloss…