説明
DJ Marshmellow Head KeychainThis super-easy to print and assemble keychain hides the connection lobe within the head for a nice clean finish. A two part print - one white and one black.A nice size of 26mm diameter by 26mm tall.Easy assembly, just attached the keychain to the lobe within the black part then feed the chain through the hole in the white part and re-attach the hoop.3D printing settingsThe black part requires no supports.The white part requires just minimal supports in the eyes and mouth (do not use supports in the middle - just put bridging on then push a hole through the top centre).Print with a 0.2mm nozzle if you have it (for maximum definition). I used a 0.4mm nozzle as pictured.
About this model
Danial030 is a 無料 3D model in the その他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
