lithophane holder - Madebyterry

lithophane holder - Madebyterry

無料 STL ガジェット
  • 15 閲覧

このモデルは Creality Cloud で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Creality Cloud で見る ↗

説明

Jazz up your photos with this unique lithophane photo holder. Made so you can add lights with a small hole in the back for cable. Custom made by me for Christmas presents this year. No supports required. I have used 5 volt LED strip and a USB cable for the lighting. You can buy LED strips and USB cables cheap online. Or customise your own lights. Note: You will have to print your own photos - Size: 100mm wide x 80mm high Size after printing: - Height: 95mm - Width: 125mm - Depth: 45mm Printing settings: Filament: PLA/PETG/ASA (PLA preferred) Colour: Any Layer height: 0.1 - 0.2 mm Nozzle size: 0.4 or 0.6 mm Walls: 3 or more Infill: 10% or higherSupports: none

About this model

lithophane holder - Madebyterry is a 無料 3D model in the ガジェット category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.

類似モデル