Logitech G29/920 screen mount

Logitech G29/920 screen mount

無料 STL ガジェット
  • 13 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Cults3D で見る ↗

説明

This is a mount to fit an Elecrow RC0505S 5" LCD screen to a Logitech G29/920. It should fit the G25/27 as well if they haven't changed the distance between the mounting clamps between models. As long as they're approx 210mm centre to centre it should fit. The side arms require (6) M3x10 bolts, the rear cover uses (4) M3x6 and the screen also uses (4) M3x6. You also need a 90 degree HDMI adaptor. I've included a picture of the correct one, make sure you get one with the right orientation for the plug side so the HDMI cable is facing backwards. The screen is available on AliExpress usually for around £40. More info on it here: https://www.elecrow.com/rc050s-hdmi-5-inch-800x480-capacitive-touch-monitor-built-in-speaker-with-backlight-control.html

About this model

Logitech G29/920 screen mount is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

類似モデル