Pendant lamp 9

無料 STL ホーム・リビング

14 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

説明

This pendant lamp is designed to be hung from the ceiling, supported by an electrical cable connected to the bulb. It is compatible with the IKEA Hemma E27 cord set (link below). The shade ring will screw to the cord grip. If you plan to use the IKEA Hemma cord set, I recommend printing the holder first, then printing the lamp. If you have a different type of cord grip for your pendant lamp, you can send us the cord grip dimensions, and we can redesign the 3D-printed holder to fit. Note that the cord grip will not lock into the holder. You will receive 2 STL files: -the pendant lamp, printed at overall dimensions 141X141X229 mm. Distance between the 3d printed holder (cord grip dimensions not included) to the bottom of the lamp is ~224 mm. -The cord grip holder Weight min. 320 g Tested with a LED light with an overall height of 120mm (from the base to cover). Use only LED light! https://www.ikea.com/gb/en/p/hemma-cord-set-white-10386577/

About this model

Pendant lamp 9 is a 無料 3D model in the ホーム・リビング category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.