Spitfire Propeller 1:4 scaled model by Alex Ng
- 14 閲覧
このモデルは MyMiniFactory で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
MyMiniFactory で見る ↗説明
Spitfire Propeller designed with Autocad 3D 1:4 model Root hub to fit into spinner: 3.4cm diameter circle. From Root to tip = 375 mm or 14.76 inches Comes in 5 parts, glued together using locttite 406 superglue for plastics Estimated 1.75mm filament needed for 1 blade (1:4 scale model) = Between 15meters to 25meters (49ft to 82ft) Print with PLA to avoid wrapping and to produce relatively sharp trailing edge of the blade. You can scale accordingly. Eg, a 1:8 model just divide full scale by 2. Recommended print settings (tested as per picture) -Vertical wall: 2 shells Infill honeycomb/rectilinear 5%-Bottom and Top solid layers: 3-Printspeed keep it generally 50mm/s throughout for smooth and sharp print especially at the trailing edge of the blade | Download free and paid 3D printable STL files
About this model
Spitfire Propeller 1:4 scaled model by Alex Ng is a 無料 3D model in the コスプレ・小道具 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.
