Mechanical Easter Egg (Easter Design Contest) - createt

説明

SECOND PLACE in the Easter Design ContestOverviewI designed an Easter egg! This is not just any Easter egg, this is the greatest Easter egg - the one to rule them all! This is my largest project to date, so your support is really appreciated.To open the egg, you use a "key" to turn the lead screw and push the petals open. This process is akin to how a flower opens, hence the naming of the six top-half sections. Inside is a small basket for holding many small Easter eggs, or one larger egg.Additional parts list31x M3x15mm bolts6x M3x20mm bolts2x 3x3mm cylindrical magnets (optional)AssemblyPlease refer to the Advanced Guide. You can preview this before purchasing, just scroll down to the last of the files and select the PDF to preview it.Print SettingsAgain, please refer to the Advanced Guide. All parts can be printed without slicer supports, though the "petals" are pre-supported. I used PLA for this project, though most other materials should work well (try to avoid cheap filament).Warning: Small parts may pose choking hazard. Not suitable for young children.Commercial License: https://cults3d.com/en/3d-model/home/commercial-license-mechanical-easter-egg-c0e1f6ebd65947e10d91Don't forget to share a photo of your make!Happy printing, -createt.