説明
Creality K1 is designed to fit the original filament installation site. No need to relocate any sensor. The design consists of 3 parts. After combining the three parts and attaching the nails, it is ready for use. Please check the pictures. You can get a nice image by painting the writing parts white as I did. Be sure to clean the supports completely. Since the parts are printed with support, it may be difficult to attach the first time, but it will be easy later.3D PRINTING SETTINGSI used creality print as a slicer. All three pieces require very little support. The support angle is 80 per cent. For the parts to be strong, please print at least 30 per cent fill rate. If you print the part attached to K1 at 100% fill rate, it will be much stronger.
About this model
【国际站】 is a 無料 3D model in the その他 category, shared by the Creality Cloud community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Creality Cloud. Use the button above to open the original page and download it.
