説明
Recently I became interested in CoreXY and wanted to see how it works, so I designed simple pen plotter. I know there are many similar and maybe better designs already, but I wanted mine to use parts that I am familiar with and are also available to purchase for relatively cheap price. I ended up reusing various 3D printer parts, arduino and RAMPS board plus pre-cut aluminum profiles.You can find blend file among files for download which contains whole design.I also used some parts from other projects. Namely the servo actuated pen holder is from this project: https://www.thingiverse.com/thing:2374238I am pretty sure all parts can be printed without support. I used ABS ,but PLA or PETG should work too.List of used parts:two Nema17 stepper motorsarduino + Ramps + two stepper driverstwo end-stop switchesfour aluminum profiles I used two 360 mm and two 320 mm but any length should workfour 8 mm steel rods ( two 370 mm and two 290 mm)GT2 6 mm belts approximately 4 meters16 F623zz ball bearings for pulleyssome m3x40 and m3x16 bolts for pulleys and motorssome m6x12 bolts for aluminum profiles8 LM8UU linear bearingssome thin zip ties to hold linear bearings in the carriageI am sure I forgot something, if you find out then let me know in the commentsI used standard marlin as firmware for arduino. Of course you need to make some changes in Configuration.h to make it work with coreXY and some atoher tweaks.To generate gcode I use inkscape, which is great open-source tool for creating…
About this model
CoreXY pen plotter is a 無料 3D model in the その他 category, shared by the Thingiverse community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Thingiverse. Use the button above to open the original page and download it.
