WLED table lamp

説明

Table lamp WLED Video https://youtube.com/shorts/OnTM-33tbwg?feature=share You can control the lamp manually via the app or via the website Adjust I have constructed it so that 5050 SMD 60 pieces of the meter fit in whether you use 12V or 5v They must not be waterproof You can decide what to take I have built the 12V version The lamp has 80 LED'S which are connected in series You'll need the following on the left ESP8266 D1 Mini https://amzn.to/3OLED4z LED's addressable 60pcs M 12V https://amzn.to/3uERqzc LED's addressable 60pcs M 5V https://amzn.to/49F7aB5 Resistors 1X 470 Ohm - 1X 10K https://amzn.to/42MaCHH DC-DC Step Down Converter https://amzn.to/3ORelOm Torque switch 2-pole https://amzn.to/49nJYaA Rotary potentiometer 10K https://amzn.to/3wlpLUd DC barrel connector https://amzn.to/3OQb9mc 12V 2A power supply https://amzn.to/48ulqLU Threaded insert M2.5X6X3.5 https://amzn.to/3UMX5hl Micro bolt screws M2.5X6 https://amzn.to/3Tg5F7b JAYO PLA Filament 1.75 mm https://amzn.to/3SPoAE6 GIANTARM HS-PLA Filament White https://amzn.to/3uIaFYC I have the LEDs in 8 strips A 10 Led's cut It is best to solder the LEDs together beforehand I made the cables 250mm long So that I have enough play to work with The compartments for the tube are not glued, just plugged in The lid is then glued on and the tube on the base With seconds of glue at the end I glued the foot again with additional hot glue For questions just write