説明
The front plate can be done in carbon fiber using the step file. The stickers I used are generic simracing stickers from ebay Everything can be 3D printed since it doesn't receive any of the base force. You can either bolt the body directly to the rim or use the 3 bolt hub (this allows to keep 3 bolts that hold the rim directly) The top switches can be replaced by regular buttons Parts required Stickers https://www.ebay.com/itm/305365671778 https://www.ebay.com/itm/304576517588 3x Rotary encoders https://es.aliexpress.com/item/10000056483250.html?spm=a2g0o.orderlist.orderlist_main.23.585b194dMT9eGe&gatewayAdapt=glo2esp 3x Knob https://es.aliexpress.com/item/1005005536812892.html?spm=a2g0o.orderlist.orderlist_main.29.585b194dMT9eGe&gatewayAdapt=glo2esp 9 or 11 Buttons https://es.aliexpress.com/item/32842544957.html?spm=a2g0o.orderlist.orderlist_main.333.585b194dMT9eGe&gatewayAdapt=glo2esp Need to cut the shaft a bit and use custom button cap 2x switch https://es.aliexpress.com/item/1005001671213465.html?spm=a2g0o.orderlist.orderlist_main.480.585b194dMT9eGe&gatewayAdapt=glo2esp#nav-review PG7 connector https://es.aliexpress.com/item/1005003274606712.html?spm=a2g0o.orderlist.orderlist_main.400.585b194dMT9eGe&gatewayAdapt=glo2esp Coiled cable https://es.aliexpress.com/item/32827713451.html?spm=a2g0o.orderlist.orderlist_main.74.585b194dfjlmfk&gatewayAdapt=glo2esp 4x m4x6x8L heat inserts 4x m4x10 countersunk bolts for regular version 3x m5x50 countersunk bolts for Passthrough…
About this model
WRC Ford Puma Button box is a 無料 3D model in the 乗り物 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
