Lee turret press (old red base) adapters for Inline fabrication case ejector kit

説明

A riser and plate to convert the lee classic turret press case ejector kit from Inline fabrication to fit the old turret press with the tall base. The (ugh this is hard to make not sound confusing) new classic turret press has a shorter base and it's the only turret press that inline fabrication currently supports. Look at the pictures. If your base looks like that and you want to run the reverse rotation case ejector kit this is what you need. The riser mounts to the bin with an M4x10 screw and nut, and the little platform is to stick the upper velcro to since there isn't a flat spot on this base. The indexing rod has to be cut down to 4.650" and rethreaded for this to work, as the rod lengths differ.