説明
This is a filament guide and sensor two-in-one. Made for my Sidewinder X1, but it will probably work as well on many others. Project homepage: https://hattedsquirrel.net/projects/filament-sensor-and-guide/ What you need: 1x micro switch (the big type: 6.5 x 19.5 x 9.5mm) 2x bearing 696ZZ 2x M3 screw 20mm + nut (for bearings) 1x M3 screw 25mm + nut (for base) 2x M2.5 screw 20mm + nut (for micro switch) 4x PTFE tubing, 4mm diameter, 43mm length Printed parts: 2x spacer (watch for layer height, big part should be 0.5mm) 1x slider 1x side 1x side (mirrored) 1x bottom How to build: Step 1: Insert spacers into first bearing. Make sure the bigger part of the spacer is actually 0.5mm thick (depends on layer height while printing). Step 2: Attach bearing with spacers to the slider. Step 3: Inset PTFE tubing into the sides, place second bearing. Step 4: Place the slicer Step 5: Attach the second side and secure it with a screw. Step 6: Inset microswitch using the M2.5 bolts. Adust its height (front screw can slide up and down). Step 7: Attach bottom.
About this model
Filament Sensor and Guide is a 無料 3D model in the その他 category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
