Black Series Figure Riser

説明

If you collect Star Wars Black Series figures, then you're aware that consistent is not a word you'd use to define any of these figures. Some pose amazingly, some don't pose at all. Some stand up straight, most not so much. So unless you leave them in the box, how are you supposed to display them so you can see all of them? Well, with this riser set of course! The full size riser fits between 4 and 6 figures per row! And if you need multiple risers, this set includes a coupler to fit them together, as well as endcaps to finish the look nicely. The channels under the riser are hollow so you can store accessories like extra blasters, lightsabers, jetpacks, helmets, etc! The foot peg slides are design to be a solid platform so figures can stand straight up, with the peg off center so they can be reversed depending on whether the peg hole is in the toe or heel of the figure. I've included foot peg sizes for both the 6" figures as well as the 3.75" ones. Every printer is dialed in a little bit differently, so the slides might require some scaling and testing in order to fit the riser nicely. I have it dialed for my CR10 v2, but depending on how well your printer is tuned, you may need to scale the pegs up or down to make them fit correctly. All files are exported as .3mf files, which is recognized by Cura and Slic3r platform slicers. If you need it in a different format, or have any questions at all, don't hesitate to message me! This product is not affiliated with Star Wars…