Lady Loki Helmet

説明

Dangerous Ladies' 3D models for Lady Loki's horned helmet. Model by Jennifer Rezny (@quicksparrows) Pre-sliced and keyed for printing on a 20cmx20cmx20cm bed. Files include: - Reference images - Large Horn .stl files - Medium Horn .stl files - Medium Horn (Magnets) .stl files. Faceplate: - 6.25" between tops of ear holes. - We suggest a test print first to ensure fit; 0.3mm layers with 0.8 walls is fine for a test print. - Because of the potential weight of the horns, you may want to consider padding the inside of the face plate with craft foam. - Two-party 5min epoxy and superglues both work for attaching elastics around the back of the faceplate, worn under the wig. Medium horns: - 12" wide; just about double the width of your head. - 11.5" tall from base to tip - Uses eight (8) 1/4" dowel pins to assemble, 1" length. You can cut these yourself from 1/4" dowelling (available conveniently in the craft section of many dollar stores) or purchase standard fluted dowel pins from any hardware store. Large horns: - 22" wide; almost four times the width of your head. This will fit through door ways. - 11.5" tall from base to tallest point. - Uses sixteen (16) 1/4" dowel pins to assemble, 1.25" length. You can cut these yourself from 1/4" dowelling (available conveniently in the craft section of many dollar stores) or purchase standard fluted dowel pins from any hardware store. Medium horns: - 12" wide; just about double the width of your head. - 11.5" tall from base to tip - Uses…