Headphone Stand (Split)

Headphone Stand (Split)

無料 STL ガジェット
  • 10 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Cults3D で見る ↗

説明

I split the original model from MakerBot since it was too large for my printer. Just print: 1 x Top 1 x Bottom 2 x Connector Unless you have a printer with a very large print area, you will probably need to put the top part at an angle, so you can take advantage of the z-axis space. The connectors are for the two holes in each part, in some cases they fit so tight that no glue is needed, but even if using glue, they help keep the parts aligned while the glue dries. I recommend gluing the parts for maximum strength.

About this model

Headphone Stand (Split) is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

類似モデル