Bench PSU by Louis-Jean
- 16 閲覧
このモデルは MyMiniFactory で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
MyMiniFactory で見る ↗説明
I had a spare 450w no name brand ATX PSU, so I turned it into a Bench PSU for projects.It is a standard setup with non variable outputs for 12v, 5.5v and 3.3v Removing the PSU board from its original enclosure is extremely dangerous. Becareful please. I have included a Fusion360 file, you can edit the mount posts on the panel to fit your own PSU board if it differs from my design. The switch hole on the fan panel was made to fit the standard mains switch found on most entry level ATX power supplies. Below are links to all the components used: Display : https://fr.aliexpress.com/item/32824062417.html?spm=a2g0o.productlist.0.0.602c332aY8jaUj&algo_pvid=df415a02-4975-463f-ac5f-87d56c4120f3&algo_expid=df415a02-4975-463f-ac5f-87d56c4120f3-0&btsid=0b0a182b15815070082511029e2c38&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ Banana Plugs : https://fr.aliexpress.com/item/33052403949.html?spm=a2g0o.productlist.0.0.49d82331JHks1p&algo_pvid=51acaa2f-0af3-4fe0-b47f-4d1679733bef&algo_expid=51acaa2f-0af3-4fe0-b47f-4d1679733bef-10&btsid=0b0a182b15815070519991668e2c38&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ Banana Panel Mount: https://fr.aliexpress.com/item/32947189113.html?spm=a2g0o.productlist.0.0.5c053847Az30HC&algo_pvid=d4b3808f-f9af-4b45-a2f2-6e1fd7caf6b7&algo_expid=d4b3808f-f9af-4b45-a2f2-6e1fd7caf6b7-10&btsid=0b0a182b15815071306173426e2c38&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ DC jack…
About this model
Bench PSU by Louis-Jean is a 無料 3D model in the その他 category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.
