Kulp K8-B (Beagle Bones) Controller PSU Mount

Kulp K8-B (Beagle Bones) Controller PSU Mount

無料 STL ガジェット
  • 10 閲覧

このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

Cults3D で見る ↗

説明

Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for PSU (verified on Alitove and Meanwell). The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Mounting Hardware: 2x - M4 - 8mm bolts (secure mount to PSU) 4x - M3 - 12mm bolts/nuts (secure controller to mount)

About this model

Kulp K8-B (Beagle Bones) Controller PSU Mount is a 無料 3D model in the ガジェット category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

類似モデル