3dSets Model 9/10 modified front indicator for 3,5mm leds
- 14 閲覧
このモデルは Cults3D で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。
Cults3D で見る ↗説明
Modified the stock front indicators for mounting a 3.5mm LED. There is a small piece of built in support on the stalk of the housing that you have to cut off. Assembling: 1) drill mounting hole for the indicator in the fender to get the cables through (I used a 3.5mm drill) 2) drill a hole beneath the fender into the engine bay (I've drilled in the front upper corner) 3) route the cable through the fender into the engine bay. 4) Insert the glass part. 5) put the LED into the housing 6) as there is no screw anymore to secure the indicator: use some glue. It should hold by friction, but that may come loose.
About this model
3dSets Model 9/10 modified front indicator for 3,5mm leds is a 無料 3D model in the 動物・クリーチャー category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.
File formats
- STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.
The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.
