Prototype Base Panels :: Polypanel Electronics by fredrik

Prototype Base Panels :: Polypanel Electronics by fredrik

無料 STL ガジェット
  • 14 閲覧

このモデルは MyMiniFactory で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

MyMiniFactory で見る ↗

説明

Some polypanel base plates for prototyping. You can get the breadboards/PCBs used here from your local electronics supplier, and of course from ebay/aliexpress/banggood etc. This set currently includes: base-mini-breadboard-170 for 170-point mini breadboards. base-mini-breadboard-170-notch for the breadboard variant that has notches on the sides. base-proto-70x30 for 70x30 mm prototype PCBs. Use M3x5 to M3x8 nylon or metal screws to attach the board (when using nylon screws, you can use a metal screw to pre-tap the threads). Notes The potentiometer panel is from this object: https://www.myminifactory.com/object/3d-print-93751 The simple 555 circuit in that picture is used to control a 9g micro servo (outside the picture), mounted with panels from: https://www.myminifactory.com/object/3d-print-91515 For more on polypanels, see makeanything.design/polypanels. | Download free and paid 3D printable STL files

About this model

Prototype Base Panels :: Polypanel Electronics by fredrik is a 無料 3D model in the ガジェット category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.

類似モデル