LED Matrix Panels :: Polypanel Electronics by fredrik

LED Matrix Panels :: Polypanel Electronics by fredrik

無料 STL ガジェット
  • 13 閲覧

このモデルは MyMiniFactory で公開されています。ファイル・画像・ライセンス情報は元の作者に帰属します。

MyMiniFactory で見る ↗

説明

Some polypanel frames for standard 1088-style 32×32×8 mm LED panels, suitable for e.g. MAX7219 LED dot matrixes from ebay/aliexpress, or Adafruit 8x8 backpacks. led-matrix-32x32 is a plain 32×32 mm frame, with a friction fit. led-matrix-32x32x8 is 8 mm deep, and is suitable for matrixes that are soldered directly to the driver PCB (e.g. backpacks). led-matrix-32x32x8-support is 8 mm deep with stops to prevent the LED matrix from being pushed in too deep. This requires you to install the matrix in the polypanel before attaching it to the PCB, which may not always be possible (and note that despite the name, you can print this without supports). For more on polypanels, see makeanything.design/polypanels. | Download free and paid 3D printable STL files

About this model

LED Matrix Panels :: Polypanel Electronics by fredrik is a 無料 3D model in the ガジェット category, shared by the MyMiniFactory community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on MyMiniFactory. Use the button above to open the original page and download it.

類似モデル