Adjustable slave wheel for SMARS

Adjustable slave wheel for SMARS

Бесплатно STL Прочее
  • 12 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

Many people had problems with the tracks length. they were too tight or too large. with this mod you can adjust the distance between the wheels. This mod is made for Chassis_S Mk2 but should also be compatible with the Mk1 (the only problem is to lock the nut). To use it you will need an M3 screw and a self locking M3 nut. I didn't tested it yet so let me know! IMPORTANT print the adjustable SW piece with one of the two flat faces on the plate and not the part that should touch the chassis ( we need to keep it elastic to enter in the wheel without break it)

About this model

Adjustable slave wheel for SMARS is a бесплатно 3D model in the Прочее category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели