EASTER EGGS - ILNUR KHARISOV

Описание

I made colorful Easter eggs with candy inside. The model is easy to print and weighs only 10 grams. To put the candy inside, first place the model one behind the other so that the extruder support beam does not interfere with it. You can print as I did 2 pieces or more, the minimum you should print 2 pieces and place them far apart from each other. While your printer is printing one egg put the candy in the first egg then as the extruder moves from the second egg to the first egg, put the candy in the second egg. Depending on the size of the candy you can decrease or increase the size of the model in the slicer, always leave a small margin when you change the size of the model. You can see how to put the candy inside the egg on the cover, I added a video in GIF format. In order to print correctly follow the instructions.INSTRUCTIONS :Nozzle diameter 0.4 mm2 wallsLayer height 0.2 mmFilling 0 %No supports requiredDon't forget a quality first layer, print the first layer at slow speed without blowing. If the model comes off the table use 3d glue.