Fully 3D printed modular RC Sailplane.

Fully 3D printed modular RC Sailplane.

Бесплатно STL Транспорт
  • 15 просмотров

Эта модель размещена на Cults3D. Файлы, изображения и лицензия принадлежат автору.

Открыть на Cults3D ↗

Описание

This is a 48 inch wingspan sailplane of my own design. All parts have been 3D printed using PLA. The wing has been test flown, but the entire assembled plane has not yet been tested. The wing uses the Eppler 214 airfoil. **** Two files updated 18 May 2013 **** The two files are the Vertstab and Fuselagetail files. A very minor change was made to the vertical stabilizer by removing some material at the bottom of the control linkage channel. I've added a feature in the fuselage tail part to allow trapping the sheath end of the flexible control cables using two set-screws. This prevents having to cement the sheath in place to prevent movement.

About this model

Fully 3D printed modular RC Sailplane. is a бесплатно 3D model in the Транспорт category, shared by the Cults3D community. You can download it for 3D printing and reuse it in your own projects under the terms of its original license.

File formats

  • STL — The most common mesh format for 3D printing — ready to slice and print on almost any printer.

The files for this model are hosted on Cults3D. Use the button above to open the original page and download it.

Похожие модели