George jetson by Steve Solomon

Описание

George Jetson, from the comic strip The Jetsons, by Hanna-Barbera. George resides with his family and his dog Astro in Orbit City in the future. His personality is that of a well-meaning, caring father, but he is often befuddled and stressed out by the problems of both his work and family lives. No supports are required. If you have the proper filament colors, no painting is needed. The model is 260mm tall. Due to some small parts, the model should not be sized smaller, but can be sized larger without issue. Enjoy! ------------------------------------------------------- Print SettingsPrinter: FlashForge Creator X Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 10% Notes: See below for helpful printing and assembly tips. ---------------------------------------------------------- Building the modelColors (there are no multiple printed pieces) Black:eyebrowseyeblacksmouthring_topring_bottomstripesbuckle..Beige or Flesh:headhand_lefthand_right..White:shirtshoesarm_leftarm_righteyewhites..Orange:hair_tophair_bottom..Blue:pants..Green:belt..Red:tongue..Any color (hidden pieces)pin_beltpin_hair.. ---------------------------------------------------------- Printing and assembly tips Printing tips1-As with most of my models, no supports are required. 2-Be sure to clean any first layer squish if you have any problem joining parts. The parts should fit nicely when printed cleanly or with a slight first layer squish. 3-I did not require any rafts or brims for any of the…